BP MODS X DOVPO LIGHTSABER POD MOD KIT – MODEL.L

BP Mods proposes an electronic cigarette out of the ordinary. Under the air of high-end materials, the Lightsaber here in the long version is a pod mod made in metal and has a wooden sleeve. The Lightsaber in a tube format offers a vape in direct inhaling and semi-direct depending on your preference.

The Lightsaber first of all has a 2100 mAh battery, rechargeable via USB-C with an output power of 60 watts. The sleeve is removeable and can be changed with different colours (sold separately). This small pod mod is also equipped with the necessary screen, switch and setting buttons.

Add the robust cartridge in PCTG (5ml) and dressed in metal for it to be perfectly associated with the battery and to obtain a strong and elegant Lightsaber. The Lightsaber is included with 2 x TMD coils to have a vape in direct inhaling (DL) or semi-direct (RDL) in 0.30 Ω and 0.55 Ω respectively.

To whom addresses the Lightsaber Long Version ?

With such a design, the Lightsaber addresses lovers of vape and beautiful material. It will also please lovers of fine direct inhaling. Thos who love MTL can choose the short version for indirect and semi-direct inhaling. The Lightsaber will also please you for its polyvalence and the possibility to personalise it with accessories which are sold separately.

Lightsaber design

You can say that the design of the Lightsaber has been worked on. Excellent hold in the hand, a sleeve in wood, compact size… The removeable cartridge is associated with the metal battery. The top cap covers the opening of the top cap to hide the silicone cap. A small screen of a small size and a steel switch are irremediably reminiscent of high-end hardware. Splendid !

Simplicity, efficiency

It has a battery of 2100 mAh it has a maximum output power of 60 watts. Three rapid clicks in the switch you will enter into the menu and proposes a modes for the watts (Power), for a vape in voltage or even Bypass. Press on the 2 setting buttons locks the power. All the settings can be visualized on the small screen, and the USB-C  connection offers a 5V/2A possible charge.

Lightsaber cartridge

This magnetic cartridge is made in PCTG, composed in steel and magnetic N52 and a little bit of silicone to close the reservoir. It has the particularity to have a removeable top cap to access the opening of the reservoir. Quite rare for a cartridge and it has a capacity of 5ml.

Filling of the Lightsaber Cartridge:

• Remove the top cap from the cartridge
• Delicately remove the silicone cap
• Fill the 5ml reservoir with e liquid
• Close the reservoir
• Install the top cap

 TMD coils

TMD for Taste Massive Delicacy, BP Mods proposes the TMD Pro Coils for RDL (and also in MTL). As well as the TMD Mesh for a vape in DL and RDL. With the Lightsaber Long Version you will find the following coils:

• TMD Pro 0.55 Ω RDL Coil, to be used from 28 to 35 watts
• TMD Mesh 0.30 Ω DL, to be used from 30 to 40 watts

Changing the coils of the Lightsaber :

• The cartridge must be empty
• Remove the cartridge
• Install the new coil into the center of the reservoir
• Place the cartridge on the battery
• Fill the reservoir and wait a few minutes so the coils is soaked with e liquid.

Features of the Lightsaber Long Version :

The Lightsaber Long Version is made by BP Mods.

The Lightsaber Long Version is included with:

• 1 Lightsaber Pod Mod
• 1 TMD Pro 0.55 Ω RDL Coil
• 1 TMD Mesh 0.30 Ω DL
• 1 Extra drip tip
• 1 Detached pieces kit
• 1 USB-C cable
• 1 User notice

Discover the Packaging of the Lightsaber Long Version BP Mods

BP Mods x DOVPO Lightsaber Pod Mod Kit – Model.L Features:

• Dimensions: 113mm x 27mm x 27mm
• Chassis Material: Wood / Metallic
• Wattage Range: 5-60W
• Battery Capacity: 2100mAh
• Charging Port: USB Type-C
• Output: Adjustable Wattage
• Operation: Firing-Button
• Fill System: Top-FIll – Removeable Cap
• Pod Capacity: 5mL
• Pod Connection: Magnetic
• Coil Installation: Press-Fit
• Coil Support: TMD / TMD Mesh / TMD Pro / VOOPOO PnP / Vaporesso GTX
• Drip Tip: MTL / DL
• Interchangeable Wood Sleeves
• Gunmetal Option: Phoebe Zhennan Wood Sleeve
• Stainless Steel Option: Bubinga Wood Sleeve

Includes:

• 1 BP Mods Lightsaber Pod Mod Kit – Model.L
• 1 5mL Pod Tank
• 1 0.55ohm TMD Pro Series Coil
• 1 1.05ohm TMD Pro Series Coil
• 1 0.3ohm TMD Mesh Series Coil
• 1 0.8ohm TMD Mesh Series Coil
• 1 MTL Drip Tip
• 1 DL Drip Tip
• 1 USB Type-C Cable
• 1 O-Rings + Silicon Plug
• 1 User Manual